• Poštovani posjetitelju, za korištenje svih mogućnosti koje Poljoprivredni Forum omogućuje, predlažemo ti da se registriraš. Besplatno je i tvoja privatnost je potpuno zaštićena. Registracija ti omogućuje pristup svim kategorijama i temama, mogućnost pristupa privicima u postovima (slike, video, tutorijali, uputstva itd), pristup malom oglasniku, direktnu komunikaciju s članovima putem privatnih poruka, automatsko praćenje tema od interesa i još mnogo toga. Veselimo se tvojoj prijavi! ❤️

KULTIVATORI - špartači

ionstegarus

Novi član
Tu od
15 Lip 2015
Poruka
11
Pozdrav,
Imam stari OLT Osijek MKPO 2/4/6 Hrvatska i ne znam koji je točan položaj kotača koji se bavi / trenira gnojivo.
Možete li mi reći je li t točan položaj (u priloženim slikama) kotača koji uključuje / trenira gnojivo?
Thank you

Hello,
I have an old OLT Osijek MKPO 2/4/6 Croatia and i dont know which is the corect position of the wheel which engages/trains the fertilizer.
Can you tell me if t is the correct position (in the attached pictures) of the wheel which engages/trains the fertilizer?
Thank you
 

Prilozi

  • 20180410_193600.jpg
    20180410_193600.jpg
    66.9 KB · Pregleda: 115
  • 20180410_193633.jpg
    20180410_193633.jpg
    66.6 KB · Pregleda: 99

ZJ

Super Moderator
Osoblje foruma
Tu od
22 Lip 2007
Poruka
28,491
You have two possible settings: left on the driving wheel shaft are smaller and bigger sprocket, and on upper shaft is opposite: bigger and smaller sprocket.
Put the chain in line with the sprockets: small bottom-big top or opposite. On that way you'll have smaller fertilizer distribution capacity, but you can better adjust it on the scale.
If this distribution capacity is too small, move chain on another setting: bigger botom and smaller upper sprocket.
If you can count tooth on the sprockets and diameter of the driving wheel, maybe I can give you the table of fertilizer delivery (from SKPR seed drill).
 

matijavz

Član
Tu od
13 Pro 2015
Poruka
235
Zna li netko gdje bi se mogli kupiti oni poklopci na mehanizmu koji tjera gnojivo za IMT kultivator??
 

komer

Iskusan lik
Premium
Tu od
1 Srp 2008
Poruka
4,008
Ja kupio u poljostroju.ako se ne varam 15ak kn su bili.
Ako nemaš mogu ti kupiti i poslati,samo mi podatke javi na pm i koliko ih trebaš;)
 

ionstegarus

Novi član
Tu od
15 Lip 2015
Poruka
11
You have two possible settings: left on the driving wheel shaft are smaller and bigger sprocket, and on upper shaft is opposite: bigger and smaller sprocket.
Put the chain in line with the sprockets: small bottom-big top or opposite. On that way you'll have smaller fertilizer distribution capacity, but you can better adjust it on the scale.
If this distribution capacity is too small, move chain on another setting: bigger botom and smaller upper sprocket.
If you can count tooth on the sprockets and diameter of the driving wheel, maybe I can give you the table of fertilizer delivery (from SKPR seed drill).

Thank you very much,

I'm confused (puzzled) regarding the correct position of the wheel support. please see the attached picture. What is the correct position A or B?

thank you
 

Prilozi

  • driving whell position.jpg
    driving whell position.jpg
    14.5 KB · Pregleda: 76

matijavz

Član
Tu od
13 Pro 2015
Poruka
235
Ja kupio u poljostroju.ako se ne varam 15ak kn su bili.
Ako nemaš mogu ti kupiti i poslati,samo mi podatke javi na pm i koliko ih trebaš;)


Tnx na info!
Svaka cast, nije bas cesto da netko ponudi pomoc...budem riješio bitno da znam di ima.;)
 

mali.alen

Član
Tu od
13 Kol 2012
Poruka
452
Thank you very much,

I'm confused (puzzled) regarding the correct position of the wheel support. please see the attached picture. What is the correct position A or B?

thank you

I would say position A
is correct
 

Zetorboy

Dobro znana faca
Tu od
12 Velj 2010
Poruka
2,758
Zasto su oltovi kultivatori jetiniji od imtovog i po cemu su onda i bolji?
 

mali.alen

Član
Tu od
13 Kol 2012
Poruka
452
I would say because my friend has the same and it is positioned like A. For other things i dont know. Sorry
 

Zoki ticić

Aktivni član
Tu od
19 Stu 2012
Poruka
2,733
What adjustments you need to do?
When I was cultivating the corn I set the duck legs approx. 12cm from both sides of corn on each rows, If you have 2 row seeder than you must have 2 row cultivator. Seeder can have more rows than cultivator but the cultivator cannot be bigger than seeder because its hard to get perfect row distance on row which depend on driver and than you have a problem.

Poslano sa mog LG-H818 koristeći Tapatalk
 
Posljednje uređivanje:

Marko355

Iskusan lik
Premium
Tu od
16 Lip 2008
Poruka
5,571
Moj dobio brzinski remont.
Stavio sve nove motike, do sljedece sezone ce biti velike kutije na njemu, nisam stigao ove sezone.
 

Prilozi

  • received_1541928372590919.jpg
    received_1541928372590919.jpg
    65 KB · Pregleda: 117
  • IMG_20180521_184608.jpg
    IMG_20180521_184608.jpg
    83 KB · Pregleda: 120
  • IMG_20180526_164456.jpg
    IMG_20180526_164456.jpg
    82.9 KB · Pregleda: 141
  • IMG_20180526_164325.jpg
    IMG_20180526_164325.jpg
    82.5 KB · Pregleda: 114

jlukaci7

Iskusan lik
Tu od
1 Velj 2012
Poruka
2,722
Da su kremšnite to bi prepoznal:wink::icon_mrgreen:
 
Posljednje uređivanje od moderatora:

Najnoviji postovi

Na vrh